HUANANZHI H610M-K LGA1700 DDR4 Micro-ATX Motherboard

A compact foundation for a compatible desktop PC build

The HUANANZHI H610M-K motherboard combines an LGA1700 socket, two DDR4 memory slots and storage/expansion connections on a compact board. The product photos identify HUANANZHI on both the PCB and box; do not confuse it with another manufacturer's similarly named H610M-K model.

Processor, memory and board specifications

• Model: HUANANZHI H610M-K, black PCB. The pictured board carries a V1.0 marking; the supplied revision should be confirmed.
• Chipset: Intel H610 series, as supplier-listed.
• CPU socket: LGA1700. The supplier lists Intel 12th, 13th and 14th generation Core support, but an exact CPU-support list and installed BIOS version are not supplied. Confirm your precise processor and required BIOS before ordering; socket type or generation alone is not a compatibility guarantee.
• Memory: 2 DDR4 slots, supplier-listed dual-channel capacity up to 64GB and speeds of 2933/2666/2133MHz. The source mentions CPU-dependent XMP support, but supported profiles, memory kits and effective speeds need manufacturer confirmation.
• Board format: supplier-listed Micro-ATX, 215 × 165 mm, approximately 8.46 × 6.50 inches. Check case mounting points and component clearances.
• Construction: supplier-listed six-phase power delivery and four-layer PCB. These do not establish support for every CPU power requirement or unrestricted high-load operation.

Storage and expansion

• SATA: 3 SATA 3.0 ports, rated in the source at 6Gb/s.
• SSD slot: 1 M.2 2280 NVMe PCIe 3.0 x4 connection, supplier-listed at up to 32Gb/s interface bandwidth. This is not a guaranteed SSD transfer speed, and M.2 SATA drive support is not established.
• Graphics/expansion: 1 PCIe 4.0 x16 slot and 1 PCIe 3.0 x1 slot, as listed. Confirm card, BIOS, case and power-supply compatibility.
• Wireless expansion: 1 M.2 Wi-Fi slot, supplier-described as CNVi-compatible. The photos show an empty slot. A Wi-Fi/Bluetooth module, antenna leads and antennas are not listed as included; confirm the exact supported module before purchasing one.

Rear connections and onboard controllers

• 2 USB 3.2 ports, listed at 5Gb/s.
• 4 USB 2.0 ports, listed at 480Mb/s.
• 1 HDMI output, supplier-described as HDMI 2.0, plus 1 VGA output.
• 1 RJ45 Ethernet connection with a supplier-listed RTL8111H Gigabit network controller.
• 3 audio jacks with a supplier-listed ALC897 audio controller.

Controller markings, HDMI capabilities and output resolution/refresh limits are not independently verified here. The board's video ports are not a substitute for a graphics processor: confirm that your exact CPU supports motherboard display output. A compatible discrete graphics card may be needed.

Internal connections and firmware

• Power: supplier-listed 24-pin main power and 8-pin CPU power connectors.
• Fans: 1 CPU_FAN and 2 SYS_FAN headers, as listed.
• Internal headers: the source lists USB 2.0, USB 3.2, front audio, Debug LED, CMOS, buzzer, TPM 12-1-pin and power/reset connections. Exact pinouts and supported accessories must be checked against the correct manual.
• BIOS: supplier-listed AMI UEFI, with scheduled startup, network wake and network boot features subject to BIOS configuration and supporting components.
• Operating systems: Windows 10 and Windows 11 are supplier-listed. An operating-system license, installed software and drivers are not included in the packing list. Confirm the requirements and drivers for your complete build rather than assuming plug-and-play readiness.

A TPM header does not establish an included TPM module, the availability of every firmware security feature or automatic Windows 11 eligibility. BIOS update method, CPU-less flashing and the BIOS shipped with this board are not specified. Use firmware only for the exact HUANANZHI model and revision.

What you get

• 1 HUANANZHI H610M-K motherboard.
• 1 SATA data cable.
• 1 product manual.
• 1 motherboard backplate, understood here as the rear I/O shield listed in the packing information, not a CPU-cooler mounting kit.

No CPU, CPU cooler, RAM, SSD, graphics card, Wi-Fi kit, case, power supply or operating-system license is listed as included. The covered CPU socket shown in the photos is not an installed processor. Additional mounting hardware and cables should be checked before starting the build.

Installation and first startup

1. Confirm the exact CPU/BIOS support, DDR4 memory, case mounting pattern, cooler fit, storage interface and power requirements before installation.
2. Shut down and unplug the system, follow the power supply's discharge guidance and use appropriate electrostatic-discharge precautions. Handle the board by its edges.
3. Follow the correct model manual for the socket mechanism. Keep fingers away from socket contacts, align the CPU correctly and never force components into place.
4. Install the board with the correct case standoffs and no extra standoffs beneath it. Fit the compatible cooler, memory and storage as directed.
5. Connect the main and CPU power cables, cooling fans and case headers using the documented pinouts. Do not interchange similarly shaped power cables or guess header connections.
6. Check clearances, cooling and cable routing before applying power. Enter firmware setup, verify detected components and install the appropriate drivers.
7. If an update is required, obtain the correct manufacturer firmware and follow its procedure without interrupting power. Seek qualified assembly help if uncertain.

Safety and care

• Never install, remove or reconnect internal components while power is connected. Do not open the power supply.
• Keep the board dry and free of conductive debris. Do not operate it on an anti-static bag or other surface not confirmed safe for powered testing.
• Use adequate cooling and supported settings. Stop if you notice overheating, burning smells, damaged connectors or unstable operation.
• Do not short headers, clear CMOS or change a battery except as directed in the manual with the required power isolation.
• A coin-cell battery is pictured. Keep loose batteries away from children; follow the manual for replacement and never charge a non-rechargeable cell. Seek urgent medical care if a battery is swallowed.
• Remove dust only with power disconnected using electronics-appropriate methods. Store or transport in protective anti-static packaging without pressure on the socket or components.

📝 Please Note: Occasionally, minor product changes may occur (such as a variation in style, shade, or packaging) due to supplier updates. If any changes affect your order, we will notify you by email. You will have 48 hours to respond before your order continues processing. We appreciate your understanding and always aim to keep you informed!

(We Advise our customers to read our policies to understand how our store functions)

•  Return/Refund Policy 
• Shipping Policy 
• Privacy Policy
• Contact Information 
• Subscription Policy
• Terms of service